1 x 10", dviejų juostų, ruporinė, tolimo slėgimo kolonėlė su integruotu pasyviu krosoveriu (1.1 kHz), galingumas 400 W / 800 W / 1.600 W, maks. slėgis 133 dB SPL peak, jautrumas 103 dB, dažniai: 70 Hz - 18 kHz, sklaida: 100° x 10°.
*Sistemos tipas: 1 x 1o" dviejų juostų, coaxial tipo garso sistema;
*Garsiakalbiai: 1 x NOVA 10/400EL, 3” 8 ohms ,
2 x 2 x NOVA TPM4-1750, 1.75 in, 8 ohms (passive),
*Matmenys: 590 mm x 340 mm x 535 mm(Wx Hx D);
*Svoris: 28 kg.;
► 2 HF compression drivers (1.75” voice coil / PM4 technology)
► Physical tuntime-correction (coaxial construction)
► Hornloaded system for long throw effect
► Phase-plug for more SPL (mid frequency range)
► Very high SPL (133 dB SPL max. / 103 dB 1W/1m)
► 100° x 10° nominal coverage
► Passive fullrange operation
► Integrated "QUICK LOCK" flyware
The EL10 is a two-way high performance line array speaker in a trapezoidal chassis for fixed installations and mobile use. The cabinet is equipped with two 1" HF drivers (1,75” voice coil), which are mounted onto a wave guide. The nominal coverage is 100° x 10° (H x V). The MF/LF section is equipped with one high-performance 10" speaker (3” voice coil), which is hornloaded. The 10” transducer is contructed behind the wave guide of the high-frequency section (coaxial construction). The EL10 can be flown in vertical colums with up to 12 units per side by using the EC1 flyframe. The angle between each EL10 can be adjusted from 0° up to 7,5° in steps of 1,5°. The EL10 is compatible with all other ELITE models including ELITE subwoofers. Up to four EL10 can be directly stacked onto the E18SUB subwoofer without any adapter or additional frame. The chassis is constructed from 15 mm plywood (birch) and covered with black PolyCoat© finish. The cabinet is equipped with two grip handles and one front grill with transparent charcoal foam backing. Two speakon connectors (NL4) are mounted at the rear side of the chassis for signal input (input) and signal link (link). The power rating of the EL10 is 400 W (RMS), the impedance is 8 ohms.
The EL10 speaker can be driven either by NOVA X or DXP series amplifiers with a digital speaker processor. The speaker can be driven also by other professional amplifiers with a maximum output power of 400 W (RMS) at 8 ohms.