Instaliacinis dviejų kanalų stiprintuvas D.A.S Audio INTEGRAL-A1002
Prekės kodas: |
10721110 |
Papildoma informacija: |
|
1263.00 EUR
Galia prie 8 omų 2 x 250 W, 1 x 1000 W
Galia prie 4 omų 2 x 500 W
100V/70V režimo galia 1 x 1000 W
Features
2 channel amplifier
500 W per channel @ 4 ohms
High Efficiency Class D topology
Low Z and High Z (Bridged 70 V/100 V) operation
Universal Power Supply
12dB/oct 80Hz HPF filter Selector (on/off)
Automatic Stand-by mode
INTEGRAL-A1002 is a dual channel, 2U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.
The amplifier delivers 2x500W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 1000W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
Output Power Ratings
Power 8 Ohms, Both Channels Driven 2 x 250 W
Power 8 Ohms Bridged 1 x 1000 W
Power 4 Ohms, Both Channels Driven 2 x 500 W
Power 100 V 1 x 1000 W
Power 70 V 1 x 1000 W
Electronics and Connectors
Amplifier Channels 2
Output Circuitry Class D
Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB)
Sensitivity 1.38 V (5 dBu)
Voltage gain 30.4 dB
Damping Factor > 1000 (8 Ω load, 1 kHz and below)
Controls Power On/Off, Gain Pots
Cooling Side-Right-to-Left
Amplifier Protections Short Circuit, DC Output, Temperature, Over/Under Voltage
LED Indicators On-Protect-Standby, Signal-Clip
Audio Signal Input Connector Terminal Block
Speaker Output Connector Terminal Block
Current Draw 230 V / 115 V 1.75 A / 3.5 A
Dimensions-Weight
Dimensions ( H x W x D ) 88 x 483 x 208 mm
3,5 x 19,0 x 8,2 in
Net Weight 3,5 kg ( 7,7 lb )
|